Umarex G36C Hi-Cap Magazine

[Jericho]

My magazine is fully wound up but will not push in BB's. I have tried taking it apart but couldn't without breaking it (so i stopped and put back the screws) Its never done this before and i dont know how to fix it. 

[cloakndagger]

youve probably got two rounds jammed in your feed wheel under the idler, empy the mag and look down in it where the spikey wheel is, ic you have a jam you shoold be able to see it. Carefully take a long screwdriver or sompn like that and rotate the spikey wheel back away from the jam whilest you kinda shake the mag and they should come free. If it isnt visibly jammed ya can look me up at a game and ill see if i can fix it. You were right in not taking it apart tho, if ya mess up and release the mainspring housing its a mess to fix lol

[VADER]

A little off subject but I have had mag problems with my UMAREX G36C.  I bought a couple of Matrix mags and they would not stay in.  The latch on them was shaped slightly different and the point of the latch was slightly rounded instead of being sharp.  FYI

[Jericho]

i will try that when i get home and ive been looking for matrix and other mags for it to use in the feb 5 game but actually shipping them to me would take too long. i know i should pm BARRICADE but do you know if they sell more stuff (than online) at the game?

[BARRICADE]

The only Magazines that are in stock with us at the games are for M4/M16 and AK.  When we can find a good deal on some G36 Mags, we will start to carry them seeing that there are more players getting these guns. 

Yeah the best thing to do with that mag is just bring it and let one of us look at it.  It maybe a simple fix. 

[cloakndagger]

Or get an m4 magwell conversion kit

[Jericho]

Or get an m4 magwell conversion kit

yeah um... how about i dont. i am a noob and/or airsoft customizing noob. the only thing i could do with a conversion kit is let it sit in my closet  haha

[CREEPER™]

Or get an m4 magwell conversion kit

yeah um... how about i dont. i am a noob and/or airsoft customizing noob. the only thing i could do with a conversion kit is let it sit in my closet  haha

Hey bud that magwell conversion is SUPER easy!  Plus, your mags will be way cheaper and you can use other guys' m4 mags if you run out!

[echo214]

and you can use other guys' m4 mags if you run out!

Just like me! except i dont have a g36, i have a m16...

[Jericho]

ill look into a conversion kit sounds good, but i really dont like the way m4/m16's look. dont know why haha. plus it could look disperportioned

[echo214]

you take one pin out, and the whole magwell comes off. heres the link: click here

thats what it looks like, but i would talk to barricade to see if he can get one cheaper for you if you want it.

[Jericho]

OMG fixed my mag. i stuck a screw driver through the reserve mouth at the top, unwound the wheel (it unwound really fast), and 16 bb's came out 

[cloakndagger]

yup, twas a jam lol

[Jericho]

thanks for the help everybody. even though we got off topic haha. peace ill be at that feb 5 game

[45 Bravo]

Jericho, i have a question about the umarex since you own one.
the U-G36 (sounds like a german U boat), is that the one that cocks the piston after the shot? like the psg1?
(you hear the pop of the bb being fired, then you hear the gearbox when on semi?)
and can be used as a springer if the battery dies?

thanks.
Ian