If you are interest in the product pleace PM me and I will answer any questions and concerns you may have. Also, it is I that sells this product.PLEASE READ: For the past 4 years tens of thousands of AirSoft Players, Ballers, and Law Enforcement Agencies have wanted us to make a mask for them. We spent 3 years asking questions and after thousands of hours of research here’s what we found. 1) A few years ago Ballers wanted a soft rubbery mask so when a Ball hit their mask it might bounce off. However with today’s guns that have rapid fire technology and that shoot 15-20 Ball per second, it doesn’t matter if one Ball bounced off, there are probably 15 more right behind it. 2) The Ballers we surveyed wanted graphics on their masks! 3) They LOVE our Anti Fog Technology. 4) They love our low profile! 5) The love our easy lens locking system, and 6) They wanted a mask they could have custom painted with whatever sick graphics they want!
So we are NOT your average Airsoft Mask Company! If you are looking for a soft rubbery mask that has a bunch of holes in it and comes with cheap foam you've come to the wrong place...If you are looking for a mask that is designed to fit 96% of the worlds population, has R.W.I Foam, (Replaceable, Washable, Interchangeable-Marks A-Lot and So Phat Series Only), is the worlds first paintable/customizable mask, has sick graphics, adjustable ventilation, has anti fog coatings that are the best in the world, fits over most glasses and sun glasses, weighs 7 oz. AND has a very low profile... u've come to the right place...
I am the Local retailer for this product and I am located in Magee, Ms 39111. I Can sell you some of these mask Cheaper than the listed price, so just ask. Click on the Link Below the pictures to go to that Specific Mask and get all the details for the mask and what it comes with. Some are just the mask, and some are the Mask, 1 thermal Lense, 1 single pane Lense, and Mask Bag. So it just depends on which you are going to choose. Once you are linked to the site you are able to look at more Mask then what was posted here. 
http://www.savephace.com/OSC?sc=13&category=887
http://www.savephace.com/Dog_Phace
http://www.savephace.com/Assassin
http://www.savephace.com/Digi
http://www.savephace.com/Boo?sc=13&category=890
http://www.savephace.com/HoorahTactical Mask FAQ's:Are your mask ASTM and/or CE Rated and approved for paintball? We have passed ASTM testing and will be CE approved soon.
Are your lenses ASTM/ANSI Rated for Paintball? Our lenses have met and exceeded ANSI and ASTM Paintball Standards for impact resistance, luminance and optical clarity.
Does your lens fog up? NO and Yes…There is no such thing as a permanent anti fog coating solution. ALL lens coatings, eventually will wear off AND if you clean them incorrectly, it WILL increase the chances of fogging and speed up the deterioration process. We’ve been doing this for along time now and we literally flew around the world 3 times to find the WORLDS BEST anti fog coatings. We use a military grade, patented anti fog technology that several of the other current PB Mask manufacturers are switching to because of our success with these coatings. We test our single pane lenses by boiling a cup of water, waiting for the water to start steaming, then we hold the inside of the lens over the boiling/steaming water to check for fog…and our single pane lenses DON’T fog up at all…Our thermal pane lenses don’t even think about fogging in these conditions either… Our lenses have AF+AS+UV Coatings that meet or exceed EN166, ASTM F659 anti-fog performance specifications, Falling sand (ASTM D968) test and Bayer abrasion resistance (ASTM F735.81-Modified) test. Independent evaluation confirms our coatings are superior to other formable coatings and silicone hard coatings. In Taber abrasion (ASTM D1044) test, the abrasion resistance outperforms any other formable coating. Our anti-fog and anti scratch coatings are retained even after extended water immersion or repeated cleaning. So, if you can make our lenses fog up, God LUV you! However, with the right humidity, temperature, heat and moisture coming from your eyes, it is possible. No other commercially available anti-fog technology offers this level of long-term effectiveness and durability.
What sizes do they come in? Our Tactical Mask is designed to fit 96% of the world’s population. Most mask, if not all of the currently out on the market are designed to fit children size heads, (usually 13 or under). Since we, everyone here at Save Phace, are grown men that weigh more than 175 lbs, (actually more like 200+ lbs) we wanted to design a mask that would be more comfortable or you can make it more comfortable by purchasing foam that is more suited to fit your head size. Yes, we have different sizes of foam for the Marks-A-Lot, Commando and So Phat Series that you can purchase separately. The CFO’s daughter is 5 year old and it fits her as well as the CFO that is about 150 lbs…
Will the paintballs stain the graphics? We’ve tested every type of paint that we could get our hands on and found NONE that would stain it! With this said, IF you leave the paint on the mask for a length of time, like overnight or a week you might stain it…Also, We couldn’t get “Evil Paint” to test, but we hear that it will stain ANYHTING…
What’s the difference in the Series? The “Diss” Series is our entry level mask, comes with a single pane lens and has cool graphics on it. The “Dope” Series has custom developed graphics on it and also comes with one single pane lens and includes a white stuff sack. The “Marks-Allot Series” comes with a single pane lens and a thermal lens as well as a custom cut Save Phace stuff bag AND can be painted to match your teams logo’s or you can airbrush it to whatever you like, (click here to see examples
http://www.savephace.com/Customize-Tactical-Mask). And YES, we offer custom painting as well. The So Phat Series come with RWI Foam (replaceable, washable, and interchangeable), one clear single pane lens AND one thermal pane lens, AND stuff bag…
